interwood.com - Quality Products, Best Price!

House & Home

Airing Schedule

No airings currently scheduled.

Related Items

$59.90>>

About this product:

"I am not a professional carpenter. Just a weekend warrior... I had cut up 20 feet of beautiful cornice trying to get my first corner to fit. I could not do it. I talked with professionals and they all told me to cope the joints. I just did not want to do that. Thanks to the internet I found the Magic Mitre box. I made my first mitre cut this afternoon. IT FIT THE FIRST TIME! You can have my electric mitre saw.... But I will fight you for my Magic Mitre. Thanks for a great invention. Very happy user."
Gary Thomas
Columbus, Mississippi

Have you tried this product?

Have a question?

Email customer service or
Call 1-888-275-5205

To check the status of your order, please click here

Magic Mitre - Instructions

Magic Mitre HomeInstructionsTips Safety Maintenance and Problem Solving
Click a link to open separate instructions for: Fitting Crown Moulding Fitting Chair Rail & Skirting Board Cutting Chair Rail for Stairs Cutting Crown Moulding for Stairs Cutting Architrave Cutting Skirting Board larger than 4" CUTTING CHAIR RAIL for going up Stairs Follow the instructions in the instruction leaflet (For example). AT THE FOOT OF THE STAIRS To determine the angle of cut required, take the Template to the staircase stringer (that is the part of the staircase against the wall) and the horizontal angle of the Floor or Skirting See FIG 11 and lock the Template in the required position. Then use the Template to set the workpiece holders at an EXTERNAL angle (See FIG 2) and lock the pivoting workpiece holders in position. The Chair Rail that is to be fitted to the wall to the LEFT hand side of the mitre joint should be placed (ON ITS BACK) for cutting in the LEFT hand locked workpiece holder as shown in FIG 12. The Chair Rail that is to be fitted to the wall to the RIGHT hand side of the mitre joint should be placed (ON ITS BACK) for cutting in the RIGHT hand locked workpiece holder as shown in FIG 12. AT A LANDING To determine the angle of mitre cut required, take the Template to the staircase stringer (that is the part of the staircase against the wall) and the angle of the landing See FIG 11 (make sure the landing is level) and lock the Template in the required position. Then use the Template to set the workpiece holders at an INTERNAL angle (See FIG 1) and lock the workpiece holders in position. The Chair Rail that is to be fitted to the wall to the LEFT hand side of the mitre joint should be placed (ON ITS BACK) for cutting in the LEFT hand locked workpiece holder as shown in FIG 12. The Chair Rail that is to be fitted to the wall to the RIGHT hand side of the mitre joint should be placed (ON ITS BACK) for cutting in the RIGHT hand locked workpiece holder as shown in FIG 12. These TOP TIPS are provided as a service from Magic Mitre Limited. The information is intended to help with the cutting and fitting of mouldings around the house with the use of the "magic mitre" product. Magic Mitre Limited and Interwood Direct assume no liability for omissions, errors or the outcome of any project. The reader and user of the product must always exercise all reasonable caution and follow all applicable codes and regulations and the safety instructions.