SAFETY INSTRUCTIONS
Always work with the Magic Mitre product securely fixed with screws to a suitable flat workbench.

• Prior to use, read and follow the instructions.
• DO NOT CUT YOURSELF
• DO NOT SCREW THE PRODUCT TO A KITCHEN WORKTOP
• When cutting always wear protective glasses and a protective breathing mask and always avoid inhaling any dust or cut fibres.
• Always immediately replace the guards to the cutting edge of tools when not in use.
• Always immediately pick up your off cut and waste materials and place them in a waste bin.

WARNING
Remember to screw the Magic Mitre to your workbench. Use a Clamp (not provided) to secure materials in place so that you do not cut yourself. It is also beneficial to get someone to hold and support the end of your workpiece (away from your saw).

If Magic Mitre is used with a Jig Saw, the Jig Saw manufacturers safety instructions must be strictly adhered to and, particular attention must be given to the type of blade used and its direction of cut must be downwards (it must only cut on the down stroke) and the workpiece must be securely held in place with a G Clamp (not supplied). Read and follow the safety precautions contained in the leaflet before using the Magic Mitre.

These TOP TIPS are provided as a service from Magic Mitre Limited. The information is intended to help with the cutting and fitting of mouldings around the house with the use of the "magic mitre" product. Magic Mitre Limited and Interwood Direct assume no liability for omissions, errors or the outcome of any project. The reader and user of the product must always exercise all reasonable caution and follow all applicable codes and regulations and the safety instructions.